Filter
Top Products
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251
Condential
1-13
Item Icon Function Description
1
Infrared
transmitter
Sends signals to the projector.
2# Laser pointer Aim the remote at the viewing screen
3 FREEZE To pause the screen image.
4 HIDE
Momentarily turns off the video. Press “HIDE” to hide the
image, press again to display the image.
5 RES�NC Automatically synchronizes the projector to the input source.
6 SOURCE
Press “SOURCE” to choose from RGB, Component-p,
Component-i, S-Video, Composite, Video and HDTV sources.
7 POWER Refer to the “Turning the Projector On/Off” section.
8 ASPECT RATIO To choose the desired aspect ratio (Auto/4:3/16:9).
9 ZOOM Zooms the projector display in or out..
10# Laser button
Aim the remote at the viewing screen, press and hold this
button to activate the laser pointer.
This function is not supported in Japanese market.
11
Empowering
key
Unique Acer functions: eOpening, eView, eTimer Managment
12 KE�STONE
Adjusts the image to compensate for distortion caused by
tilting the projector (± 40 degrees).
13 MENU
• Press “MENU” to launch the Onscreen display (OSD)
menu, back to the previous step for the OSD menu
operation or exit the OSD menu.
• Conrm your selection of items.
14 PAGE
For computer mode only. Use this button to select the next or
previous page. This function is only available when connected
to a computer via a USB cable.
15 Pre./Rewind
Press “Pre./Rewind” to go to previous index or press
continuously to rewind the playing media le.
16 Enter/Play/Pause Press “Enter/Play/Pause” to play/pause media le.
17 Next/Fastforward
Press “Next/Fast-forward” once to go to next index or press
continuously to fast-forward the playing media le.
18 Back/Stop
Press “Back/Stop” to stop playing media le or go back to
upper data folder.
19 VGA
Press “VGA” to change source to the VGA connector. This
connector supports analog RGB, �PbPr (480p/576p/720p/
1080i), �CbCr (480i/576i) and RGBsync.
20 COMPONENT No COMPONENT function.
21 S-VIDEO Press “S-VIDEO” to change source to S-Video.
22 VIDEO Press “VIDEO” to change source to composite video.
23 SD/USB A
Press “SD/USB A” to toggle between SD and USB A sources.
This projector supports various le formats of photo/audio/
video.