Filter
Top Products
Troubleshooting
26
BenQ PB8220 User’s Guide
Status Messages
On-Screen Messages Description
SEARCHING
Projector is searching for input.
ACQUIRING SIGNAL
Projector has identified the input signal and is running
the auto image adjustment function.
OUT OF RANGE
Input signal frequency exceeds the projector’s range.
LAMP WARNING -
CHANGE LAMP AND
RESET LAMP TIMER!
The lamp has been in operation for 1900 hours. Install a
new lamp for optimal performance.
OUT OF LAMP USAGE
TIME. YOU HAVE TO
CHANGE THE LAMP!
The lamp has been in operation for 1980 hours, and the
power will turn off after 20 hours.
OUT OF LAMP USAGE
TIME. CHANGE THE
LAMP!
The lamp has been in operation for over 2000 hours.
The warning message will display for 30 seconds every 5
minutes after you turn on the projector and the power
will turn off automatically after 10 minutes.