Filter
Top Products
2
English ...
Usage Notice
Precautions
Follow all warnings, precautions and maintenance as recommended in
this user’s guide to maximize the life of your unit.
Warning-
Do not look into the projector’s lens when the lamp
is on. The bright light may hurt your eyes.
Warning-
To reduce the risk of fire or electric shock, do not
expose this product to rain or moisture.
Warning-
Please do not open or disassemble the product as
this may cause electric shock.
Warning-
When changing the lamp, please allow unit to cool
down, and follow all changing instructions.
Warning-
This product will detect the life of the lamp itself.
Please be sure to change the lamp when it shows
warning messages.
Warning-
Reset the “Lamp Hour Reset” function from the On
Screen Display “Management” menu after replacing
the lamp module (refer to page 26)
Warning-
When switching the projector off, please ensure the
projector completes its cooling cycle before
disconnecting power.
Warning-
Turn on the projector first and then the signal
sources.
Warning-
Do not use lens cap when projector is in operation.
Warning-
When the lamp reaches the end of its life, it will
burn out and may make a loud popping sound. If
this happens, the projector will not turn back on
until the lamp module has been replaced. To replace
the lamp, follow the procedures listed under “Re-
placing the Lamp”.