Filter
Top Products
39
... English
Wireless projection
Configuring your Acer WPG
You will need to be connected to an Acer WPG to change any configuration
settings. Once you're connected, click the Configure button in the upper right-
hand corner of the Acer WPG screen.
Projector ID
Check this feature to enable projector identification. If this option is enabled, a
4-digit number will be displayed when the projector is started up, or when the
projector is not receiving any input.
Configuration password setup
Use this to set a password to restrict access to the configuration menus. This
is useful when the WPG is used by a number of people, and you do not wish
unauthorized persons to make any changes to the configuration.
The first time you click on this link, you will see the following: