Acer PH530 Projector User Manual


  Open as PDF
of 41
 
11
... English
Introduction
Power
Powering On the Projector
1. Removethelenscap.
2. Ensurethatthepowercordandsignalcablearesecurely
connected.ThePowerLEDwillash
red
.
3. Turn on the lamp by pressing “Power” button on the control
panel
andthePowerLEDwillturn
solid red
.
4. Turnonyoursource(computer,notebook,videoplayer
,etc.).Theprojectorwilldetectyoursourceautomatically.
If the screen displays "Lock" & "Source" icons, it means the pro-
jector locks on this source type and there is no such type of input
signal found
If the screen displays “No Signal”, please make sure the signal
cables are securely connected.
If you connect multiple sources at the same time, using the
“Source” button on the remote control or control panel to switch.
Powering On/Off the Projector
Turn on the pro
-
jectorrstandthen
the signal sources.
1
MENU
Power
Source
Resync
Temp
Lemp
 previous next