Acer PW730 Projector User Manual


  Open as PDF
of 46
 
36
English ...
Appendices
Replacing the lamp
The projector will detect the lamp life itself. It will show you a
warning message “Lamp is approaching the end of its useful
life in full power operation. Replacement Suggested!” When
youseethismessage,changingthelampassoonaspossible.
Makesuretheprojectorhasbeencooleddownforatleast30
minutes before changing the lamp.
Warning:
Lamp
compartment is
hot! Allow it to
cool down before
changing lamp!
Warning:
To
reduce the risk of
personalinjury,do
not drop the lamp
module or touch
the lamp bulb. The
bulb may shatter
and cause injury if
it is dropped.
1
3
4
2
Lamp Changing Procedure:
1. TurnthepowerofftheprojectorbypressingthePowerbutton.
2. Allowtheprojectortocooldownatleast30minutes.
3. Disconnect the power cord.
4. Removethecover.
5. Push up and remove the cover.
6. Remove the 3 screws from the lamp module.
7.Pulloutthelampmodule.
To replace the lamp module, reverse the previous steps to restore.
 previous next