Filter
Top Products
Chapter 1 23
Contrast Ratio 250 : 1 Typ.
Optical Rise Time/Fall Time [msec] 30Typ.,50 MAX.
Nominal Input Voltage VDD [Volt] +3.3 Typ.
Power Consumption [Watt]
(VDD Line)
(VCFL Line)
1.2 Typ.
3.5 Typ.
Electrical Interface 4 pairs, single LVDS
Temperature Range [degree C]
Operating
Storage (Shipping)
0 to +50
-20 to +60
AC Adapter
Item Specification
Vendor & model name Lite-on 65W PA 1650-02 (WPFC) 3P
Input Requirements
Maximum input current (A,
@100Vac, full load)
1.7A max@3.5A/100Vac and 240 Vac
Nominal frequency (Hz) 50 / 60
Frequency variation range (Hz) 47 - 63
Nominal voltages (Vrms) 100 - 240
Inrush current The maximum inrush current will be less than 220A when the adapter is
connected to 100Vac(60Hz) and 240Vac(50Hz) respectively.
Efficiency High efficiency 82% minimum, at 100~240Vac AC input, full load, warm-up
condition.
Output Ratings (CV mode)
DC output voltage Offers constant voltage 19.0V output source with 65W max output power
capacity.
Noise + Ripple 380mvp-pmax (20MHz bandwidth) for resistor load
Output current 0A (min.) 3.42A (max.)
Output Ratings (CC mode)
DC output voltage 18.05 ~ 19.95V
Constant output 3.8A
Dynamic Output Characteristics
Start-up time 5 sec. (@115 Vac and 230Vac full load)
Hold up time 5ms min. (@115 Vac input, full load)
Over Voltage Protection (OVP) 29V
Short circuit protection Output can be shorted without damage, and auto recovery
Electrostatic discharge (ESD) 15kV (at air discharge)
8kV (at contact discharge)
Dielectric Withstand Voltage
Primary to secondary 2150Vdc 10mA for 1 second
Leakage current 60uA max (240Vac, 60Hz)
Regulatory Requirements Internal filter meets;
1. FCC class B requirements.
2. VDE 243/1991 class B requirements.
3. CISPR 22 Class B requirements.
3. VCCI class II requirements.
LCD
Item Specification