Filter
Top Products
18 Chapter 1
Hardware Specifications and Configurations
NOTE: The BIOS can be overwritten/upgraded using the FLASH utility (AWDFLASH.EXE).
NOTE: Please read “Memory Channel Mode” on page 19.
Processor
Item Specification
Type Intel® Pentium 4 1.8 ~ 3.2GHz FSB400/533/800MHz
Intel® Celeron 2.0 ~ 2.6GHz and above
Slot Socket 478
Speed Internal: 1.4 ~ 3.2GHz+
External: 400/533/800MHz Data Bus Frequency for Springdale-G.
Minimum operating speed 0 MHz (If Stop CPU Clock in Sleep State the BIOS Setup is set to Enabled.)
Voltage Processor voltage can be detected by the system without setting any jumper.
BIOS
Item Specification
BIOS code programmer Award
BIOS version V6.0
BIOS ROM type PLCC
BIOS ROM size 4MB
Support protocol PCI 2.1, APM1.2, DMI 2.00.1, E-IDE, ACPI 1.0, ESCD 1.03, ANSI ATA 3.0, PnP
1a, Bootable CD-ROM 1.0, ATAPI
Boot from CD-ROM feature Yes
Support to LS-120 drive Yes
Support to BIOS boot block feature Yes
System Memory
Item Specification
Memory socket number 4 sockets
Support memory size per socket 128/256/512/1024MB
Support maximum memory size 4GB (4096MB)
Support memory type DDR SDRAM PC3200/PC2700/PC2100
Support memory speed DDR 400/ DDR 333/ DDR 266
Support memory voltage 2.5V
Support memory module package 184 -pin DIMM
Support to parity check feature Yes
Support to Error Correction Code (ECC)
feature.
No
Memory module combinations You can install memory modules in any combination as long as they match
the Memory Combination specifications.
Memory Combinations
DIMM 1 DIMM 2 DIMM3 DIMM4 Total
128MB~1GB 128MB~1GB 128MB~1GB 128MB~1GB 128MB~4GB