Filter
Top Products
X163W
EN-11
STANDARD TIMING TABLE
To reduce the need for adjustment for different modes, the monitor has default setting modes that are most
commonly used as given in the table below. For optimum adjustment, the user is suggested to perform the
Auto Setup under Windows “Full Screen” pattern or using the pattern in the floppy disk provided. The only
condition to store as a user mode is the new display information must have 1 KHz difference for horizontal
frequency or 1 Hz for vertical frequency or the sync signal polarities are different from the default modes.
Display Mode Hor. Frequency
(kHz)
Vert. Frequency
(Hz)
Pixel Frequency
(MHz)
SYNC Polarity
(H/V)
31.469 59.940 25.175 -/-
37.861 72.809 31.500 -/-
VGA 640x480
37.500 75.000 31.500 -/-
35.156 56.250 36.000 +/+
37.879 60.317 40.000 +/+
48.077 72.188 50.000 +/+
SVGA 800x600
46.875 75.000 49.500 +/+
48.363 60.004 65.000 -/-
56.476 70.069 75.000 -/-
XGA 1024x768
60.023 75.029 78.750 +/+
SXGA 1152x864 67.500 75.000 108.000 +/+
63.981 60.020 108.000 +/+ SXGA 1280x1024
79.976 75.025 135.000 +/+
WXGA 1366x768 47.765 59.856 85.500 -/+
1280x960 60.000 60.000 108.000 +/+
1360x768 47.712 60.015 85.500 +/+
VESA
1280x720 44.772 59.855 74.500 -/+
VGA TEXT 720 x 400 31.469 70.087 28.322 -/+
640x480 35.000 66.667 30.240 -/-
832 x 624 49.725 74.500 57.283 -/-
Macintosh
1024 x 768 60.150 74.720 80.000 -/-