Filter
Top Products
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
APW 5400
40” Wide Industrial LCD monitor
CHAPTER 7 TROUBLESHOOTING
1. The membrane power light is not ON
- Press the power On / Off on LCD membrane to check if the monitor is in the ON mode.
- Check the power cord is properly connected to the LCD display and power outlet.
2. Power does not turn ON
- Check whether the power plug is securely inserted into the receptable.
3. No picture are displayed
- Check cables for disconnection.
- Check whether the power for all inout equipment is ON.
- Check for connection to wrong terminals or for wrong input mode.
4. Remote controller does not function properly
- Check for incorrect battery orientation.
- Check for dead batteries.
- Check whether you are pointing the remote control transmitter properly at the display's receiver.
- Check for any obstacle between the remote and the display.
5. There are spots on the screen
- Check whether your AV equipment is affected by interference from automobiles, trains, high-volt-
age transmission lines, neon signs or other potential sources of interference.
6. Degraded colors/tints
- Check whether all picture adjustments have been properly made.
7. Improper screen position/size
- Check whether screen position and size have been properly adjusted.