Filter
Top Products
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2005 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
RMC 7185
1U Rackmount System
Installing the System into a Rack
This section provides information on installing the Acnodes RMC7185 into a rack. If the system has
already been mounted into a rack, you can skip ahead to Sections 2-5 and 2-6. Note: This rail will fit a
rack between 26" and 33.5" deep.
There are a variety of rack units on the market, which may mean the assembly procedure will differ
slightly. The following is a guideline for installing the RMC7185 into a rack with the rack rails provided.
You should also refer to the installation instructions that came with the rack unit you are using.
Identifying the Sections of the Rack Rails
Each assembly consists of two sections: an inner fixed chassis rail that secures directly to the server
chassis and an outer fixed rack rail that secures directly to the rack itself.