Filter
Top Products
Configuring Windows 2000 Professional 15
Checking the installation in Windows 2000 Professional
Next, find out if the 1394 FireWire Card has been properly
installed and configured for use with your operating system.
Step 1 On the Windows desktop, right-click the icon for My
Computer. On the menu that appears, click Proper-
ties. The system properties dialog box will appear.
Click the Hardware tab to bring it to the front, then
click the Device Manager button.
Step 2 In Device Manager, click the plus (+) sign next to
IEEE 1394 Bus Host Controller to expand that sec-
tion of the listing. A listing for an “Actiontec 1394
FireWire Card” should appear as shown in the illus-
tration below:
The highlighted area shown above should match the
same section of the listing displayed by your com-
puter. If so, the 1394 FireWire Card has been
installed correctly. See “Connecting Devices to the
Actiontec 1394 FireWire Card” on page6 to connect
FireWire devices to the card.