Filter
Top Products
26
Actiontec Network Attached Storage Device User Manual
27
Chapter 3 Using the Administrative Utility
Sync Now
Click this button to synchronize with the NAS Device immediately.
Send E-Mail Alerts…
Click here to enable the sending of e-mail alerts by the NAS Device. Alerts will be
sent when there is some problem requiring the administrator’s attention.
E-Mail Address (1)/(2)
Enter the e-mail addresses to which the alerts will be sent.
Subject
Enter the text that will appear in the “Subject” text box of an e-mail alert.
Enable WINS
Click here if the network has a WINS Server. If enabled, the NAS Device will regis-
ter with the WINS Server. This will allow users on the network to locate the Device
through a router. (Without WINS, “Network Neighborhood” or “My Network
Places” only scans the local network.)
WINS Server
If WINS is enabled, enter the IP address of the WINS Server. Normally, this will be a
Windows NT/2000/XP Server.
Enable Guest Logins
If enabled, “guest” can be used as user ID to login to the NAS Device. If disabled,
“guest” will not be accepted as a login.
Convert Failed Logins to “Guest” Logins
If this option is enabled, all Windows users will be able to access the NAS Device
via “Network Neighborhood” or “My Network Places,” with “guest” access rights.
By default, the “guest” user has read/write permission to the “Disk” folder on the
USB hard drive, and all folders on the USB flash drive.