Filter
Top Products
Wireless Connectivity Expert
ACT-IR100S-L and IR100SL-M
User’s Manual
© Copyright 2000-2008 ACTiSYS Corp.
Page 8 of 20
Apr. 22, 2008
3. APPLICATIONS
3.1 Embedded IrDA
®
protocol stack
The mandatory IrDA protocol layers, IrLAP (comply with TEST frame capability requirement) and IrLMP
(including IAS) are handled by ACT-IR100S-L/LM, In addition, TinyTP, IrCOMM, IrLPT, IrOBEX
transport are all included.
The incoming/outgoing IrDA user data payload are buffered and then transferred to/from the host. The
baud rates of IrDA traffic and host interface are independent of each other. The flow controls of IrDA
traffic and host interface are also independent of each other.
3.2 SIR IrPHY encoder-decoder
The ACT-IR220VACF chip use in this adapter is an IrPHY encoder-decoder. It translates UART or
RS232 NRZ signals to/from IrPHY SIR code (RZI modulation).
The ACT-IR220VACF is a half-duplex infrared communication processor for exchanging data from
IR and RS232, ACT-IR220VACF cover data baud rate between 9.6kbps and 115.2kbps.
The IrPHY specification allows two kinds of modulations: 3/16 of a bit duration pulse, or minimum pulse
duration of 1.63 us, we use minimum pulse duration of 1.63 us to modulation bit data.
t
t
NRZ
RZI
NRZ
RZI
ACTiSYS Confidential Information
Version 1.2.0.1