Filter
Top Products
Infrared Modem User’s Manual
Page 16 of 41
Revision 1.0
2003/11 From 3JTech
3. Make sure the name is "Hayes compatible modem"
Speed is "57,600" baud.
Connect via is "Serial" and
Fax class is "Auto".
Tap on "Initialization"
Enter "ATZ" under Init. (Reset) string.
Enter "AT&F" under Data init. string.
And enter "AT&D2" under Fax init. string.
Tap "Handshaking"
Set flow control to "None" under Flow control.
Terminal detect (DSR/DTR) and Carrier detect (DCD) should be unchecked.
Tap "OK"; tap "OK" again to close "Modem settings".
Tap "Internet" and enter your Internet service provider information:
Tap "Edit" and you can enter your ISP name, for example: "Earthlink"
Chose "Dial-up" next to Connection Type.
Enter Standard dial-up number, for example: 941-1034.
Tap "Account" under Edit Internet service, enter Username and Password.
Tap "Addresses" then "Login" then "Advanced", without changing any
settings.
Tap "Done" and tap "OK" to close Internet service settings
(5) To set up an Email Account:
Tap the button on the upper left corner, choose "Settings" under "Tools" menu, and
then choose "Email". Set up your E-mail account by entering your Email name,
address, and SMTP server (if any). Use MIME encoding and Auto send on opening
should be checked OK
Email Screen:
(6) To set up your Fax information:
Under the "Tools" menu choose "Settings", and then choose "Fax".