Acu-Rite 13026 Clock User Manual


 
9
Using the Alarm Clock
Set Alarm Time
Press and release the “ ” button to enter ALARM SET MODE.
To adjust the currently selected (ashing) item, press and release the “ ” or
“ buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the “ ” button to adjust the next
preference. The preference set order is as follows:
ALARM CLOCK HOUR
ALARM CLOCK MINUTE
ALARM EVERY DAY or WEEKDAY ONLY SELECTION
You will automatically exit ALARM SET MODE if no buttons are pressed for 5
seconds. Enter setup mode at any time by pressing the “ ” button.
Momentary Backlight
During power adapter use, press the Snooze button for momentary backlight
at 100% brightness. During battery-powered use, press any button for
momentary backlight.
Moon Phase
Track the phases of the moon, conveyed through simple lunar phase icons.
USB Charging
Charge your mobile device by plugging your device’s
USB power cord (not included) into the USB charging
port on the back of the alarm clock.
USB charging is only available during power adapter
use; USB charging is not active when operating on
battery-power only.
Note: Follow the manufacturer’s instructions for your mobile
device(s) to determine compatibility with the USB charging
feature on this product. Some devices may not support USB
charging or may require a higher power rating than this product provides.
Observe the charging status on your device. Ensure your device is working
properly before attempting to charge.
OPERATION
CHARGE
USB DEVICE
DC 4.5 v
FULLNEW WAXING
CRESCENT
WANING
CRESCENT
WAXING
GIBBOUS
WANING
GIBBOUS
1ST
QUARTER
3RD
QUARTER