Filter
Top Products
5
Using the Scale
Remove the cover from the top
of the scale by lifting it from
one side. Cover may be used
to weigh items on the scale
(optional).
Measure Weight
1. Place the scale on a at, stable surface.
2. Press the "ON/OFF" button to power the scale ON.
3. Wait for the display to show "0.00".
4. Press the "UNIT" button to select your preferred measurement units.
Measurement units include: GRAMS, OUNCES, PENNYWEIGHT, TROY
OUNCES, and PIECE COUNT.
5. Place item(s) to be weighed on the center of the scale.
6. Weight will be shown on the display. Press the "UNIT" Button to convert
the measurement units between grams (g), ounces (OZ), dwt (d), oz t (t)
and piece counting mode (See below).
Piece Counting Mode
When Piece Counting Mode is selected, "PCS" will show on the display. To use
Piece Counting Mode you must rst calibrate the scale to an item. Next, you
can place any amount of that same item on the scale and the scale will display
the quantity (pieces) of that item.
Calibrate the Scale to an Item
1. Place the scale on a at, stable surface.
2. Press the "ON/OFF" button to power the scale ON.
3. Press the "UNIT" button to select Piece Counting Mode ("PCS" is shown
on the display).
4. Press and HOLD the "UNIT" button for 3 seconds to select 25, 50 or 100
pieces. When a quantity has been chosen, place that same number of
items on the weighing platform.
5. The quantity selected will ash on the display. The display stops ashing
when the scale has determined the weight of the items.
6. Weight will be shown on the display.
Determine the Quantity (Pieces) of an Item
1. Press the "ON/OFF" button to power the scale ON (if applicable).
2. Place any quantity of the item the scale has been calibrated to in the
steps above on the scale.
Continued on page 6.
OPERATION