Filter
Top Products
6
Getting Started Checklist
Complete these steps to install and begin using your Adaptec
ACS-100 USB Enclosure:
❏ Install the device driver—Windows 98SE only (see below).
❏ Install a disk drive (see page 7).
❏ Connect the enclosure and power it on (see page 9).
❏ Prepare the disk drive for use (see page 9).
Installing the Device Driver–Windows 98SE Only
Note: Windows XP/2000/Me and Macintosh users—No driver
installation is required. Your Adaptec ACS-100 USB Enclosure
works with the drivers built into your operating system.
Continue with Installing a Disk Drive on page 7.
Before you begin, ensure you have the most recent operating
system updates installed on your computer. Refer to the Microsoft
Web site to download updates.
To install the device driver:
1 Power on your computer, if you have not already done so.
2 Insert the CD into your CD-ROM drive.
3 From the Windows Start menu, click Run, then click Browse.
4 Browse to the CD-ROM drive, then double-click Setup.exe to
begin the driver installation.
5 Follow the on-screen instructions to install the driver.