Filter
Top Products
13
Troubleshooting
What if there is no SCSI controllers icon under Device Manager, or the
SlimSCSI 1450 software driver does not appear under Device
Manager?
If the SCSI controllers icon or the software driver does not appear:
1
Double-click the Add New Hardware icon in the Control
Panel.
2
Select Yes on the second screen of the Add New Hardware
Wizard to have Windows search for the SlimSCSI 1450.
3
Follow the onscreen instructions.
If Windows 95 does not detect the SlimSCSI 1450, run the Add New
Hardware Wizard again:
1
Double-click Add New Hardware in the Control Panel.
2
Select No on the second screen of the wizard.
3
Select SCSI controllers on the next screen.
4
Select the model of your Adaptec SCSI adapter.
If the SlimSCSI 1450 is not listed, you may be able to install the
driver from the Windows 95 CD-ROM. To do this, follow these
steps:
1
Place the Windows 95 CD-ROM in your CD-ROM drive and
run the Add New Hardware wizard.
2
Select No on the second screen of the wizard.
3
Select SCSI controllers on the next screen.
4
Click the Have Disk button, then click the Browse button.
5
Look in the
\drivers\storage
directory of the CD-ROM and
select the model of your SCSI adapter.
How can I check the status of a resource (for example, IRQ,
Memory, I/O)?
1
Click the Start button, point to Settings, then click Control
Panel.
2
Double-click the System icon, then click the Device Manager
tab.
3
Click Computer, then click Properties.