ADC Termination Block Network Card User Manual


  Open as PDF
of 4
 
9/08•102097AE
TrueNet
®
CopperTen
®
Termination Block
TrueNet
®
CopperTen
®
Termination Block
2
www.adc.com • +1-952-938-8080 • 1-800-366-3891
Specifications
MECHANICAL
Wire range for solid and stranded copper conductors: 0.4 mm to 0.65 mm (26 to 22 AWG)*
Wire insulation diameter range (PE, PVC): 0.7mmto1.4mm
Number of wire terminations: > 100
Wire insertion force (0.5 mm conductor diameter): 6 N
Wire pull out force, radial (0.5 mm conductor diameter): 5 N
Wire pull out force, axial (0.5 mm conductor diameter): 35 N
Number of patching cycles: Modules:upto750
Patch Plugs: up to 200
ELECTRICAL
Transmission, performance and reliability: TIA-568.B.2-10 standards
Voltage/current rating at 25 ºC (77 ºF) ambient: 150 VAC at 2.5A max
Insulation resistance: > 50,000 M at 500 VDC
ENVIRONMENTAL AND SAFETY
Safety compliance: UL 1863
Flammability rating of plastic housing: UL 94-VO
Environment for use: Indoors or in dry enclosure
* Should there be a requirement to terminate cables other than 10 Gigabit cable, a maximum of 2 equal diameter
solid conductors only, of up to 0.5 mm conductor diameter can be terminated per slot. Only 1 conductor of
stranded wires per slot can be terminated. If any conductors >0.5 mm diameter have been terminated, reversal
to smaller conductors is no longer possible.
 previous next