ADC UltraWAVE Switch User Manual


 
6/08•106407AE
UltraWAVE Micro BS Plus
UltraWAVE Micro BS Plus
GSM Base Station Controller and Base Transceiver Station
2
www.adc.com +1-952-938-8080 1-800-366-3891
Product Highlights
Available in 850, 900, 1800 and 1900 MHz frequency bands•
Frequency hopping•
Sectorization•
General Packet Radio Service (GPRS)•
Dynamic power control (uplink and downlink)•
Significantly improved BTS sensitivity: -114 dBm (optimal combining diversity) or -111 dBm (no diversity)•
Remote monitoring•
External alarms for third party equipment are also supported•
Optional redundant power supply with PSU failure alarm support•
Integrated full rack solution available: UltraWAVE integrated with additional on-site equipment such •
as transmission, battery backup, etc. in one rack
Common hardware modules: single slot TRX, processor card, RF module•
GSM EFR voice codec•
The Micro product line provides a compact and cost-effective platform, which helps lower the cost
of network ownership. They are easy to upgrade or repair in the field and provide a range of new
monitoring and control functions. The UltraWAVE Micro BTS supports up to six TRXs in one chassis or
up to four with external BTSs. With a single compact chassis, it can support an S222 site. It has the
industry leading power amplifier at 50 Watts when configured for 850, 900, 1800 and 1900 MHz GSM
networks. Micro supports all the key BTS features, such as frequency hopping, sectorization, and GPRS.
It provides sufficient capacity for rural and urban coverage (up to S222) and is flexible enough to scale
from O1 to S222 supporting the popular BTS configurations, S111 and S222.
The Micro BS Plus increases the BTS coverage with industry leading power output (50W measured at
antenna port without combining). Receive sensitivity with antenna diversity is up to -114 dBm. Designed
for easy expansion of the BTS capacity, the Micro BS Plus is field upgradable. Operators can start with a
small system and pay as they go to add capacity.
The Micro BTS is designed for low cost maintenance with remote monitoring, external alarms,
overheating protection, redundant power supply, field replaceable modules, and easy front access. It can
reduce the on-going operation expenses for the operators. An integrated turn-key BTS package option
is available with transmission, battery, and other site equipment.