Filter
Top Products
79
Unit Configuration
This page provides access to a selection of both basic and fundamental settings
for the AdderView CATx IP.
Keybd Layout
Use the arrow buttons to match the keyboard layout expected by the host
system.
Admin Passwd
Enter the password that will be used to gain administrator access to the
AdderView CATx IP. There can only be one admin user and only that user is
given access to the configuration menus. The admin password background will
be red until a reasonably secure password has been entered, although this is
only advisory as any password or no password may be entered.
Unit Name
The name entered here will be displayed on the local menus and the remote
VNC/browser windows.
Time and Date
Use the left and right arrow keys to select the correct time and date. The time
entry uses the 24 hour clock notation. The internal real time clock will continue
to run for roughly one week without power to the unit, after that it will be lost
and require resetting. Use the up and down arrow keys to move between each
of the sections within the time and date entries.
Encryption
Three options are available: Always on, prefer off, prefer on. The one to choose
depends on the specific details of your installation - see Encryption settings for
details. The use of encryption imposes a slight performance overhead of roughly 10%
but is highly secure against third party intrusion.
AdderView CATx IP Unit Config
Time
Encryption
Date
21
Prefer Off
4
27
Jan
31
2008
CancelSave
: :
Unit Name
UK
Admin Passwd
Firmware Version 1.5
Keybd Layout
Hardware Rev 1
To get here
1 From a local or remote (not accessible from a global keyboard), log on as
the ‘admin’ user.
2 Press
(hotkeys can change).
3 Press
to select ‘More menus’.
4 Select ‘Functions’.
5 Select ‘Configure IP port’.
6 Select ‘Unit Configuration’.