Filter
Top Products
welcome contents
installation
operation
rter
inormation
6
LOCAL
AD
D
To speaker
output port
To USB port
To primary video
output port
Connections at the local module
1 Where possible ensure that power is disconnected from the computer
system to be connected.
4 Optionally connect a local video
monitor to the video out feed-
through connector on the local
module.
3 Optionally connect local speakers
to the audio output connector
on the local module.
LOCAL
AD
D
To local
speakers
PO
WE
R
OUT
LIN
K
TO
R
EMO
TE
ON
To local
monitor
2 Attach the video, USB (see the
Important note on page 5) and
(optionally) audio connections
from the computer system to
the relevant sockets on the
local module.
[MS2 variant only] Optionally
attach a second video input
from the computer system to
the upper video in socket on
the MS2 local module.
Note: The MS2
variant has its primary
video, USB and audio
connectors arranged
in a similar manner to
the single unit (shown
above).
To secondary video
output port
To secondary
local monitor
[MS2 variant only] Optionally
attach a second video monitor
to the upper video out socket
on the MS2 local module.