Addonics Technologies AD2U3PX1 Computer Hardware User Manual


  Open as PDF
of 2
 
Adding the USB3.0 host controller card to an existing
Windows system
Software Installation:
Note: Install NEC driver first by running the
NECEL-USB3.0-Host-Driver-10170-setup from the CD that came with
your package before installing the host controller.
A. From the CD start-up menu select Other Controllers. Select Model
#AD2U3PX1.
B. Install the NECEL-USB3.0-Host-Driver-10170-setup
C. After driver installation, it is recommended to shutdown your system.
Hardware Installation:
1. Power off PC and remove its cover.
2. Select an empty PCI-E slot and insert the USB3.0 host controller.
3. Makes sure to secure the bracket with a screw. Close the PC cover.
4. Attach a 15-pin SATA power cable from the system’s power supply to
the 15-pin SATA power connector on the host controller.
Confirming USB3.0 Driver Installation
1. Right click the My Computer icon and select Manage.
2. Click Device Manager in the Menu Tree.
3. Click the “+” sign in front of Universal Serial Bus Controllers. You
should see:
NEC Electronics USB3.0 Host Controller
NEC Electronics USB3.0 Root Hub.
www.addonics.com
Phone: 408-573-8580
Fax: 408-573-8588
Email: http://www.addonics.com/sales/query/
CONTACT US
 previous