Filter
Top Products
Addonics Technologies Users Guide v1.0
4-Port SATA II PCI RAID5/JBOD Controller Card
11
B. STRIPPED RAID Set Configuration in RAID BIOS:
1. Power ON your PC.
2. Wait until the system prompts for the RAID BIOS Configuration Utility.
Press CTRL+ S or the F4 key to enter the BIOS RAID Utility.
3. The RAID Utility menu screen will be displayed. Select Create RAID
set.
4. Choose RAID 0. Press Enter. Press Enter to automatically create RAID
set.
5. Press Enter to select the Raid size.
6. Are You Sure? Press Y.
7. Under the Logical Drive Component, you should see SiI Raid0 Set and
the Drive Capacity.
8. Press CRTL+E to Exit.
9. Are you sure to exit? Press Y.
10. The PC will reboot.
11. At the Windows Set-up screen, press F6 to specify and add the driver.
12. Insert the Floppy Driver diskette containing the driver from step 1 above.
Press S, then press Enter.
13. Select
Silicon Image SiI 3124 SATARaid Controller for Windows XP/
Server 2003 or
Silicon Image SiI 3124 SATARaid Controller for Windows 2000,
press Enter.
14. Press Enter to continue and follow on-screen instructions to
complete installation.
C. MIRRORED RAID Set Configuration in RAID BIOS:
1. Power ON your PC.
2. Wait until the system prompts for the RAID BIOS Configuration Utility.
Press CTRL+ S or the F4 key to enter the BIOS RAID Utility.
3. The RAID Utility menu screen will be displayed. Select Create RAID
set.
4. Choose RAID 1. Press Enter. Press Enter to automatically create a
RAID 1 set without data copy.
5. Press Enter to select the Raid size.
6. Are You Sure? Press Y.
7. Under the Logical Drive Component, you should see SiI Raid1 Set and
the Drive Capacity.
8. Press CRTL+E to Exit.
9. Are you sure to exit? Press Y.