Addonics Technologies ADSACF-N Computer Hardware User Manual


  Open as PDF
of 2
 
Hardware Installation:
Step 1: Connect Y-type power cable to the power connector on the adapter. This
will provide power to the adapter and the CF card.
Step 2: Connect a SATA cable to the SATA connector on the adapter and the other
end to the SATA controller port.
Step 3: Start the Computer.
Note: If you insert the CF card while your system is ON and it does not get
detected, probably your SATA host controller does not support hot swap.
www.addonics.com
Phone: 408-573-8580
Fax: 408-573-8588
Email: http://www.addonics.com/sales/query/
CONTACT US
 previous