Filter
Top Products
www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Mode Switch:
Note: Only applies on eSATA connection
I. Setting up the device in eSATA mode
a. Connect USB power cable from PC to the eSATA /
USB DigiDrive.
b. Attach eSATA cable from eSATA / USB DigiDrive
to the PC eSATA port.
The tables show drive icon and media detection
behavior basing on the mode switch setting and the
type of eSATA port the eSATA / USB DigiDrive is
connected to.
M1 mode – force flash media to become Fixed disk
type
Drive icon Media Detection
Hot Swap
eSATA port
Icon appears only
when flash media is
inside
Flash media is
automatically
refresh and
detected when
added or removed
Non hot swap
eSATA port
Icon appears only
when flash media is
inside
Flash media
detection requires
manual refresh in
Device Manager
M2 mode – force flash media to become Removable
disk type
Drive icon
Media Detection
Hot Swap
eSATA port
NOT RECOMMENDED
Non hot swap
eSATA port
Icon always there
with or without flash
media inside the
DigiDrive
Flash media
automatically
detected when
added or remove
Mini USB port
Mode switch
(M1 or M2)
eSATA port 5V power connector