Filter
Top Products
ADDONICS TECHNOLOGIES
Model: CDC5HXAES
III. How to operate the Cipher tower after initial setup
1. Insert the 5 AES 256-bit cipher keys into each cipher keyhole on the
Diamond Cipher enclosures located at the front of the Cipher tower.
2. Push the power switch of the Cipher tower to turn it on. Observed
that the green Cipher power LEDs at the front of the Cipher tower
are on. If they did not, reinsert the cipher keys and re-power the
Cipher tower.
3. Use the system’s File Explorer to access the files on the encrypted
drive.
4. For security purposes, remove the cipher keys from the Cipher
tower after the drives are detected by the system. All the files being
transferred into the drives are still encrypted even if the cipher key is
removed.
5. When the Cipher tower is restarted, the 4 cipher keys must be
inserted again in order to gain access to the drives.
Best Practice:
Create a label to identify the SATA hard drive and the associated Cipher
key used.
TECHNICAL SUPPORT
Phone: 408-453-6212
Hours: 8:30 am - 6:00 pm PST
Email: http://www.addonics.com/support/query/