Filter
Top Products
www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Setup options
10-1. Language
Use this option to select the language of the system, currently only Eng-
lish is supported.
10-2. Copy Size
Controls how much of the source drive to use for copy operations, in
percentage. Default setting is ALL (100%).
10-3. Startup Menu
Sets the first menu option to appear after boot. Default setting is Copy
HDD.
10-4. Auto Compare
Controls whether or not targets are compared automatically when copy is
complete. Default setting is OFF.
10-5. Button Sound
Enables audible beep when pressing buttons. Default setting is ON.
10-6. Device Info
Displays information about connected drives. Main display is drive manu-
facturer and size. Press up/down to select drives, ENT to display model
number and firmware revision of selected drive.
10-7. System Info
Displays firmware version and date.
10-8. Fast Copy
When this setting is ON, the duplicator will attempt to copy the source
drive's contents instead of the entire disk. Also controls Compare function.
Default setting is OFF.
NOTE: Target drive size is still required to be equal to or greater than
source. Only works with source drives formatted using Master Boot
Record. If the source drive has a boot record other than MBR, the entire
disk will be copied as if Fast Copy were OFF. If the source drive is format-
ted with a Master Boot Record and contains only FAT32 or NTFS parti-
tions, identical partitions will be created on the target(s) and only the files
will be copied. If the source drive with MBR format includes partitions
other than FAT32 or NTFS, all sectors of all partitions (including FAT32
and NTFS) will be duplicated.