Filter
Top Products
www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
How to Remove the Top Cover:
1. Locate the 2 screws at the back of the
storage rack
2. Turn screws counterclockwise to
loosen.
3. Lift the top cover and pull towards the
rear end of the rack.
To Mount Back the Top Cover:
1. Align the top cover with the edges of
the rack.
2. Lay it flat on the rack and slide it
towards the front of the rack.
3. Turn screws clockwise to tighten.
Top Cover Screws
I
O
I
O
I
O
I
O
I
O
I
O
Thermal Management Card on the RAID Rack*
Fan1 to Fan8 could be set either “ENABLE” or “DISABLE”. When all the fans are set
on “DISABLE”, the Fan LED will have no light on.
Fan Connectors
Overheat Buzzer
Floppy Power Connector
Ambient Detect Terminal
Temp. Setting
(40°C, 50°C, 60°C)
Fan Detect Selection
Fan, Temperature and Power LED Connectors
*The Thermal management card in the RR2035ASDES is pre-configured. This diagram is for reference only.