Filter
Top Products
Thermal Management Card on the RAID Rack*
Fan Connectors
Overheat Buzzer
Floppy Power Connector
Ambient Detect Terminal
Temp. Setting
(40°C, 50°C, 60°C)
Fan Detect Selection
Fan, Temperature and Power LED Connectors
www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
*The Thermal management card in the RR2035ASDES is pre-configured. This diagram is for reference only.
Port Multipliers
Dipswitch
SET Button
Array 1
Array 2
Array 3
Array 4
Fan 1 to Fan 8 could be set either “ENABLE” or “DISABLE”. When all
the fans are set on “DISABLE”, the Fan LED will have no light on.
Temperature setting is configured for 50°C by default. Switches are
40°C, 50°C and 60°C. Set only one switch in the ON position.