Filter
Top Products
Version 3.10E DAS Release Notes 9
21 Dec 2001
Update from UNIX Server DAS 1.x
The update from UNIX DAS 1.x to DAS/2 3.1 should be
performed by trained customer personnel. The update requires
that the UNIX host DAS server is replaced with OS/2 DAS server
software (AMU controller). AMU configuration changes, as well as
client DAS_SERVER environment variable changes, are necessary.
The AMU configured DAS host is no longer required.
Update from UNIX Server DAS 1.2x
The update from UNIX DAS 1.2x to DAS/2 3.1 should be
performed by trained customer personnel. The update
requires AMU configuration changes. The AMU configured
DAS host is no longer required.
Update from OS/2 Server DAS 1.30x
The update from UNIX DAS 1.30x to DAS/2 3.1 should be
performed by trained customer personnel. The update does
not require AMU configuration changes.
Update from OS/2 Server DAS 3.01
The update from UNIX DAS 3.01 to DAS/2 3.1 should be
performed by trained customer personnel. The update does
not require AMU configuration changes.
Update from OS/2 Server DAS 3.02
The update from UNIX DAS 3.02 to DAS/2 3.1 should be
performed by trained customer personnel. The update does
not require AMU configuration changes.
DAS Installation and Configuration
Installation and configuration of the DAS products should be
performed by authorized and trained personnel.
DAS Server Installation
Perform the following steps to install DAS:
Step 1 Press <Ctrl> + <TAB> to determine if the DAS
Server is running.