ADTRAN 128-Port CSM Switch User Manual


 
ADTRAN, Inc.
901 Explorer Boulevard
Huntsville, AL 35806
P.O. Box 140000
Huntsville, AL 35814-4000
256 963 8000 voice
256 963 8030 fax
General Information
800 9ADTRAN
info@adtran.com
www.adtran.com
Pre-Sales
Technical Support
888 5ADTRAN
support@adtran.com
www.adtran.com/support
Where to Buy
800 827 0807
www.adtran.com/where2buy
Post-Sales
Technical Support
800 726 8663
support@adtran.com
www.adtran.com/support
Regional Offices
Dallas, TX
972 830 9070
Denver, CO
303 471 9150
Kansas City, KS
800 471 8649
Newark, NJ
800 471 8656
Ontario, Canada
416 290 0585
Quebec, Canada
877 923 8726
San Antonio, TX
888 223 7671
International Inquiries
+1 256 963 8716 voice
+1 256 963 6300 fax
international@adtran.com
www.adtran.com/international
Specifications subject to change without notice. ADTRAN and Total Access are
registered trademarks of ADTRAN, Inc. All registered trademarks and trade
-
marks mentioned in this publication are the property of their respective owners.
ADTRAN is an ISO 9001, ISO 14001
and a TL 9000 certified supplier.
128-Port CSM
Total Access
®
3000 128-Port Cell Switch Module
Product Specifications
Front Panel Features
Power LED
Status LED
Test LED
ATM LED
Clock LED
Lockout LED
On Line LED
Mechanical
Single Total Access 3000 multiplexer slot
Interface
Network
Received through the access modules
Supports DSX-1, SHDSL, ADSL, ADSL2+, and
DS1 IMA access modules
Subscriber
Default 16 VCs per interface
ATM UNI 3.1/4.0 compliance
Direct mapped ATM cells
Payload scrambler per subscriber on by default
(can be disabled through management interface)
Single-bit header error correction option
(on per system basis)
Electrical
–42 VDC to –56 VDC input voltage range
Fully operational with either A or B power feed
Regulatory Standards
NEBS Level 3
GR-1089-CORE, Issue 3
NRTL Safety Listed
Management
Supports AIS, RDI, CC, CC Activate/Deactivate
OAM cells
OAM&P interface
TL1 and SNMP management support through SCU
Supported by Total Access EMS management
systems
Synchronized PM and provisioning between active
and standby units
QoS reporting and management
Automatic Protection Switching (APS)
1:1 equipment protection
Front panel manual APS control switch
Timing
External BITS, line, or local timing modes
ATM Switching
Supports ATM traffic classes
CBR
VBRrt
VBRnrt
UBR
Per VC queuing and scheduling
Environmental
Operating: –40°C to +65°C
Storage: –40°C to +85°C
Relative humidity: Up to 95 percent, noncondensing
Ordering Information
Equipment Part #
128-Port Cell Switch Module 1181041L4
Fully hot-swappable (ESD wrist strap required)
Full feature set available when a single multiplexer installed
61181041L4-8B January 2008
Copyright
©
2008 ADTRAN, Inc.
All rights reserved. Printed in the U.S.A.