ADTRAN 6540 SHDSL Network Card User Manual


  Open as PDF
of 2
 
PRICING AND AVAILABILITY 800.827.0807
TECH SUPPORT 800.726.8663
RETURN FOR REPAIR 256.963.8722
www.adtran.com
61230001L1-22B
Warranty: ADTRAN will replace or repair this product within the warranty period if it does not meet its published specifications or fails while in service.
Warranty information can be found online at www.adtran.com/warranty
.
MENU TREE
1. Unit Information
Main Menu
2. Provisioning
3. Status
1. NT
2. LT
1. 2-Wire
2. 4-Wire
0. Disabled
1-15. Alarm Threshold
0. Disabled
1-127. Alarm Threshold
0. Disabled
1-900. Seconds
2. Permanent On
3. Sync Mode
1. Permanent Off
1. From DCE, TC (Circuit 114)
2. From DTE, ETC (Circuit 113)
1. Internal Clock
2. Nx64 ETC(113)/X
3. G.703 Rx Clock
0. Disabled
1-900. Seconds
1-65535. Seconds
00h to FFh
1. Unit Options
3. G.703 Options
1. Unit Mode
2. Cross-Connect Map
3. Clock Source
4. Circuit ID
5. Date and Time
6. Restore Factory Defaults
7. Upgrade Firmware
8. Local Management
9. Change Password
1. ES 15-Minute Alarm Threshold
2. SES 15-Minute Alarm Threshold
3. UAS 15-Minute Alarm Threshold
0. Disabled
1-65535. Seconds
4. CVC 15-Minute Alarm Threshold
5. LOSWS 15-Minute Alarm Threshold
6. OS 15-Minute Alarm Threshold
0 to 255 = Delay in ms
2. SHDSL Options
1. ISDN-PRA V3
2. G.704 CRC-4 Multiframing
3. Timeslot Idle Pattern
4. Spare Bits Insertion to Span
5. Spare Bits Pattern to Span
6. Spare Bits Insertion
7. Spare Bits Pattern
8. RAI Generation
9. E-bit Generation
10. ES 15-Minute Alarm Threshold
11. SES 15-Minute Alarm Threshold
12. UAS 15 Minute Alarm Threshold
13. CVC 15-Minute Alarm Threshold
4. Nx64K Options
4. SHDSL Rx Clock
1. Disabled
2. Enabled
* 2-wire mode: 192 kbps to 2.304 Mbps (N x 64 kbps, where N=3 to 36)
4-wire mode: 384 kbps to 4.608 Mbps (N x 64 kbps, where N=even numbers, 6 to 72)
4. Test
5. Performance History
5. G.703 BERT
4. G.703 Local Loopback
7. Nx64k Local Loopback
6. G.703 Services
8. Nx64k Remote Inband Loopback
9. Nx64k BERT
1. SHDSL Port
2. G.703 Port
3. Reset All
7. Terminal Mode
Local Management
Remote Virtual Terminal Management
3. SHDSL BERT
1. Dual Sided
2. Customer Transparent
3. Customer Non-Transparent
4. Network Transparent
5. Network Non-Transparent
1. ALT
2. 2047
3. 2E15-1
4. QRSS
5. Test Options
1. Permanent Off
2. DTE Driven
1. LTU
2. NTU
1. Interface Mode
2. Payload Rate (kbps) *
3. SNR Margin Alarm Threshold (dB)
4. Loop Attenuation Alarm Threshold (dB)
5. Outage Auto-Retrain
6. PM Thresholds
1. Disabled
2. Enabled
0. Disabled
1-900. Seconds
1. Disabled
2. Enabled
1. Disabled
2. Enabled
00h to FFh
1. Disabled
2. Enabled
00h to FFh
1. Disabled
2. Enabled
0. Disabled
1. Interface Type Auto Detection
2. Interface Type Manual Select
3. Inactivity Alarm Delay (Secs)
4. Tx Clock Source
5. Tx Clock Polarity
6. X.21 C Mode
7. X.21 I Mode
8. V.35/V.36 RTS (Circuit 105)
9. V.35/V.36 RTS (Circuit 106)
10. V.35/V.36 RTS to CTS Delay (ms)
11. V.35/V.36 DSR (Circuit 107)
12. V.35/V.36 DTR (Circuit 108/2)
13. CVC 15-Minute Alarm Threshold
1. Disabled
2. Enabled
0. Disabled
1-100. Alarm Threshold
1. Permanent On
2. DTE Driven
1. X.21
2. V.35
3. V.36
1. Normal
2. Inverted
3. Auto
1. Permanent On
2. Sync Mode
1. Permanent On
2. DTE Driven
1. Permanent Off
2. Permanent On
3. RTS Driven
1. Permanent Off
2. Permanent On
1. Permanent On
2. DTE Driven
1. Loopback Types
2. Inband Loopback Options
3. Loopback Timeout (Min)
4. BERT Pattern
5. BERT Pattern Polarity
6. Pushbuttons (All)
7. SHDSL Port Select Pushbuttons
8. V.35/V.36 RL (Circuit 140)
9. V.35/V.36 LL (Circuit 141)
10. V.35/V.36 TI (Circuit 142)
0. Disabled
1-199. Time Out in Minutes
1. In-band Loopback Protocol
2. G.703 Services In-band Pattern Detection
3. Nx64k In-band Pattern Detection
1. Dual Sided
2. Transparent
3. Nontransparent
1. PN127
2. V.54
1. Disabled
2. Enabled
1. Disabled
2. Enabled
1. Normal
2. Inverted
1. Disabled
2. Enabled
1. Permanent Off
2. Test Driven
1. SHDSL Port
2. G.703 Port
3. G.703 Services
4. Nx64K Port
5. Reset All Status
1. SHDSL Local Loopback
2. SHDSL Remote Loopback
2. Remote Inband Loopback
3. BERT
1. Local Loopback
6. TSCAN
1. Restart Bad Splice Detector
2. 24 Hour Counts
6540 SHDSL 2-Wire/4-Wire NTU, AC Powered
 previous