ADTRAN 1224R PoE Switch User Manual


 
Optional VPN continued
IKE Modes: Main, Aggressive,
Perfect Forward Secrecy,
Mode Configuration
Dead Peer Detection
NAT Traversal V3
Network Address Translation
Basic NAT (1:1), NAPT (Many:1),
and Port Translation
NAT compatible SIP ALG
Secure Management
Multi-level access control
TACACS+
RADIUS AAA
SSH CLI and SSL GUI
Network Access Control
Port Authentication (802.1x)
MAC-based Port Security
Private VLAN Edge
Administration
Familiar Command Line Interface (CLI)
Web-based GUI
n-Command support
SNMP v3
SYSLOG Logging
Email Alerts (SMTP)
Policy Statistics
SNTP Client/Server
Diagnostics
Port Mirroring
Ping
Traceroute
LLDP (802.1ab)
Environment
Operating Temperature: 0° to 50 °C (32° to 122 °F)
Storage Temperature: -20° to 70 °C (-4° to 158 °F)
Relative Humidity: Up to 95%, non-condensing
Physical
Chassis: 1U, 19“ rackmountable metal enclosure
Dimensions: 4.4cm H, 44cm W, 20.5cm D
Weight: 5.44 kg
AC Power: 100–250 VAC, 50/60 Hz
Power Dissipation: 25 watts (85 BTUs/hour)
Agency Approvals
FCC Part 15 Class A
C-tick
CE Mark
UL 1950/CSA
FCC Part 68
RoHS (NetVanta 1224STR PoE)
ADTRAN NetVanta products
are VoIP-Ready! Inherent
QoS functionality supports
Voice over IP needs!
Ordering Information
Equipment Part #
NetVanta 1224R PoE
with US Power 4200530L1
with UK Power 4200530L1#UK
with Euro Power 4200530L1#EUR
with Australian Power 4200530L1#AUS
NetVanta 1224R PoE with VPN
with US Power 4200530L2
with UK Power 4200530L2#UK
with Euro Power 4200530L2#EUR
with Australian Power 4200530L2#AUS
NetVanta 1224STR PoE
with US Power 4200570L1
with UK Power 4200570L1#UK
with Euro Power 4200570L1#EUR
with Australian Power 4200570L1#AUS
NetVanta 1224STR PoE with VPN
with US Power 4200570L2
with UK Power 4200570L2#UK
with Euro Power 4200570L2#EUR
with Australian Power 4200570L2#AUS
Connectors
NetVanta 1000Base-SX SFP (LC Connectors) 1200480E1
NetVanta 1000Base-LX SFP (LC Connectors) 1200481E1
DBU Interface
(using DIM)
WAN Interface
(using NIM)
NetVanta 1224STR PoE
NetVanta 1224R PoE
Back Panel
NetVanta Network Interface Modules (NIMs)
E1/FE1 NIM
E1/FE1 + G.703 NIM
ADSL NIM
Serial Interface NIM
T1/FT1 NIM
T1/FT1 + DSX-1 NIM
Dual T1/FT1 NIM
56/64 kbps NIM
NetVanta Dial Backup Interface Modules (DIMs)
ISDN BRI “S/T”
Interface DIM
ISDN BRI “U”
Interface DIM
Analog DIM
Serial DIM
Terminates a full E1 or fractional E1
Offers full E1 or fractional E1 interface, plus additonal
G.703 interface to drop-off voice traffic to a PBX
Supports ADSL (Annex B), including ADSL2 and
ADSL2+ at rates up to 25 Mbps
Supports a V.35, EIA-530, or X.21 (V.11) interface for
synchronous operations up to 4 Mbps
Terminates a full T1 or a fractional T1
Offers full T1 or fractional T1 interface, plus addtional
DSX-1 interface to drop-off voice traffic to a PBX
Terminates two individual T1s/FT1s or two T1s
aggregated together
A WAN interface for single 56k or 64k
Digital Data System (DDS) network
Restoral via Euro-ISDN at 64 kbps
Restoral via the PSTN at 64 kbps
V.90 restoral and remote dial-in configuration
and management
Restoral via an external modem