Filter
Top Products
Chapter 3. Terminal Menu Operation and Structure
3-18 Express 4100/4110 User Manual 61200176L2-1
RIP/Direction
Write security: 3; Read security: 5
RIP/V2 Secret
Write security: 0; Read security: 0
This is a text string used for authenticating advertised routes.
IP/NAT
The Network Address Translation general parameters are set up under
this menu.
NAT/DHCP Mode
Write security: 3; Read security: 5
When this option is set to On, the Express 4100/4110 acts as a DHCP
server and will dynamically assign IP, network mask, default gateway,
and DNS addresses to any device which transmits a broadcast DHCP
request. The addresses assigned are based on the Express 4100/4110’s
own IP address and will be within the same network. This mode is most
commonly used with the NAT functionality. The default is Off.
NAT/DHCP Renewal Time
Write security: 3; Read security: 5
This is the number of hours that the DHCP server should allow the device
before it is required to send a new DHCP request. The default is 15 hours,
and 0 represents an infinite lease.
None
All routes are advertised, including
routes learned from the Ethernet port.
No attempt is made to poison these
routes.
Tx and Rx
(def) RIP advertisements are transmitted and
listened to on the Ethernet port.
Tx only
RIP advertisements are transmitted and
not listened to.
Rx only
RIP advertisements are listened to but
not transmitted.