Filter
Top Products
61200.130L1-1 FSU User Manual 55
Chapter 6. DTE Port Configuration
Poll/Response Timeout (TIMEOUT)
For multi-point configurations, set the amount of time the FSU
waits for a poll response before issuing another poll.
Poll/Response Timer Threshold (THRESHOLD)
For multi-point configurations, set the maximum number of
response timeouts allowed before a session is terminated.
Slow Poll Ratio <N:1> (POLL RAT)
Determine how often devices on the Slow Poll List are polled.
This list is automatically managed based on poll timeouts.
Initially, all controllers are on the Normal list. When a controller
times out a fixed number of times, it is moved to the Slow Poll
list. A controller remains on this list until it responds properly to
a poll.
The number entered is the number of times controllers on the
Normal list are polled before controllers on the Slow Poll list are
polled. Enter 1 to disable this option.
Protocol Address Table
Unit Address (UNIT ADDR)
For a multi-point connection, enter the unit address used for
specific unit identification. The address may consist of a maxi-
mum of seven alphanumeric characters. There must be one
alphabetic character for this parameter so the FSU can use the
upper case version for the port address and the lower case
version for the select address.
LLC2 SSAP (LLC SSAP)
Defines a point-to-point connection on the network. For each
bisync SDLC connection, the SSAP of one FSU should match the
DSAP on the other FSU.
LLC2 DSAP (LLC DSAP)
Define a point-to-point connection on the network. For each
bisync SDLC connection, the DSAP of one FSU should match the
SSAP on the other FSU. See the section SNA/SDLC with Local
Spoofing in the chapter Applications for a configuration example
which demonstrates the SSAP and DSAP arrangement.