FPM-3150 Series User Manual 4
1.5 Connectors
The following connectors are situated on the left hand side of the
FPM-3150G Series:
VGA Port (DB-15)
This DB-15 connector can be connected to the system via the external
15-pin DB-15 connector locatd on the left side of the system unit.
DVI Port (DVI-D)
Connected with a standard DVI connector thru I/O port of this unit. Only
supports digital signals
Touchscreen Connector (DB-9) (optional)
This connector will be present only if a touchscreen is installed. It must
be connected to the RS-232 port of the PC. The touchscreen cable is
included with all orders which include the touchscreen option.
Touchscreen Connector (USB) (Optional)
This connector will be present only if a touchscreen is installed. It must
be connected to the USB port of the PC. The touchscreen cable is
included with all orders which include the USB touchscreen option.
DC 12V Power In
This connector will be connected to the DC 12V Switching Power
Supply.
Note: RS-232 & USB touch screen interface not allow to
connect into the system at the same time.