Filter
Top Products
10
Status
In this screen, you can see the current settings and status of this Access
Point. You can change settings by selecting specific tab described in
below.
System
System
Uptime
The time period since the device was up.
Firmware Version
The current version of the firmware installed in this
device.
Wireless Configuration
Wireless Mode There are four modes supported,
Access Point, Client
(Ad-hoc and Infrastructure), WDS Bridge
and WDS
repeater. The default mode is Access Point
. If you
want to change to bridge
mode, please go to
Wireless/WDS Setting to enable the WDS function.