Filter
Top Products
29
requires that digital certificates be exchanged in the authentication phase. The server
presents a certificate to the client. After validating the server’s certificate, the client
presents a client certificate to the server for validation.
MD5-Challenge: MD5-Challenge is the easiest EAP type. It requires the wireless station
to enter a set of user name and password as the identity to RADIUS Server.
Session Resumption: There are “Disabled”, “Reauthentication”, “Roaming”,
“SameSsid”, and “Always” selections for you to choose whether to recovery the session in
different status.
Identity: Enter the name as the identity for the server.
Password: Enter the password as the identity for the server.
Use Client Certificate: A client certificate is required for TLS, and is optional for TTLS and
PEAP. This forces a client certificate to be selected from the appropriate Windows Certificate
Store and made available to the RADIUS server for certification.
Tunneled Authentication:
-- Protocol: When the authentication type is PEAP or TTLS, select a protocol to be
used to build the encrypted tunnel.
-- Identity: This is the protected user EAP Identity used for authentication. The identity
specified may contain up to 63 ASCII characters, is case sensitive and takes the form of
a Network Access Identifier, consisting of <name of the user>@<user’s home realm>.
The user’s home realm is optional and indicates the routing domain.
-- Password: The password used for authentication. It may contain up to 63 ASCII
characters and is case sensitive.
3.3.4 802.1x Setting-CA Server