Filter
Top Products
AEGPS - Protect 3.M 2.0 - EN - 01/2012 V1 - Due to our policy of continuous development, the data in this document is subject to change without notice.
AEG is a registered trademark used under licence from AB Electrolux.
AEG Power Solutions
Approach your local AEG Power Solutions
representative for further support.
Contact details can be found on:
www.aegps.com
Protect
3.M 2.0
Intelligent
communication
Protect 3.M 2.0 contains a
powerful communications
module that readily supplies
all relevant information
(measurements, alarms
and error messages). All
information is supplied via
an easy to use LCD screen
Large multi-language
LCD screen
Languages supported:
»German
»English
»French
»Spanish
»Portuguese
»Italian
»Turkish
»Russian
»Chinese
Interfaces
»6 integrated remote signal
contacts
»RS232 interface
»Two expansion slots for
additional remote signal
contacts, MODBUS
extension card and SNMP
adapter
Battery Management
Each UPS power module
contains its own battery
charger with intelligent
charging electronics. These
can be adapted to the battery
in use and facilitate the use
of vendor independent
standard batteries.
A temperature compensated
charging curve ensures
an optimum charging
regime. Automatic testing
informs you of the charging
state of charge and when
charging will be complete.
Protect 3.M 2.0
Customer Benefits
Modular concept
»The UPS output can be easily
adapted to any required
performance parameters.
»Rapid expansion by insertion
of new modules at any time
and without additional costs.
»N+1 redundancy module
increases reliability
Low maintenance costs
»Module replacement in
case of failure within the
shortest possible time.
»For multiple UPS devices,
module exchange between
units is possible.
High efficiency
»Efficiency of 94 % at 35 % load
»Better efficiency means less
heat and thus lower running
costs for air conditioning
»Significant reduction
of CO
2
emissions