Filter
Top Products
5
obligations such as warranty agreements, service contracts,
etc. entered into by AEG or its representatives without prior
notice in the event of maintenance and repair work being
carried out with anything other than original AEG parts or
spare parts purchased from AEG.
Handling
PROTECT A. is designed and constructed so that all
necessary steps for start-up and operation can be performed
without any internal manipulation of the unit. Maintenance and
repair work may only be performed by trained and qualified
personnel.
Illustrations are provided to clarify and facilitate certain steps.
If danger to personnel and the unit cannot be ruled out in the
case of certain work, it is highlighted accordingly by
pictographs explained in the safety regulations of chapter 3.
Hotline
If you still have questions after having read these operating
instructions, please contact your dealer or our hotline:
Tel.: +49 (0) 1805 234 787
Fax: +49 (0) 1805 234 789
Internet: www.AEGpartnerNet.com
Copyright
No part of these operating instructions may be transmitted,
reproduced and/or copied by any electronic or mechanical
means without the express prior written permission of AEG.
© Copyright AEG 2008. All rights reserved.