Filter
Top Products
STEP Dionysos Job: 210%XXXX5511-0002 5965-5601E Comp: 04-28-00 Time: 11:20 OP: NN
PDFINFO H 5 6 0 1 - 0 2
2
Product Specifications
Input
DC:
Maximum voltage (any terminal to any other terminal or
chassis): 120 Vdc
AC rms:
Maximum voltage (any terminal to any other terminal or
chassis): 120 V rms
Maximum current (per channel common, non-
inductive): 50 mA
Maximum power per channel: 1 VA
DC
Maximum thermal offset
per channel, differential
Hi-Lo: 4 µV
Closed channel resistance: 100 Ω ± 10%
Insulation resistance
(between any two points): 10E9 Ω
Insulation resistance
(Hi to Lo, power off): n/a
AC
Minimum bandwidth
(-3 dB, 50 Ω source/load): 10 MHz (protection resistors shorted)
Crosstalk (channel-to-
channel):
100 kHz: –70 dB
10 MHz: –20 dB
Both: n/a
Closed channel
capacitance:
<150 pF Hi-Lo, <150 pF Lo-Guard, <2000 pF
Guard-Chassis
General Characteristics
Relays: Reed relays
Break-before-make
Relays open on power down
Relays open on power up
Minimum relay life:
No load: 10E8 operations
Rated load: 10E7 operations
Screw terminal wire size: 16 to 26 AWG (1.5, 1.2, 0.9, 0.75, 0.5 mm)
Scanning rate: 600 channels/s typ.
General Specifications
VXI Characteristics
VXI device type: Register based, A16, slave only
Size: B
Slots: 1
Connectors: P1
Shared memory: None
VXI busses: None
C-size compatibility: Requires E1403C
Instrument Drivers
See the Agilent Technologies Website (http://www.agilent.com/find/
inst_drivers) for driver availability and downloading.
Command module
firmware: Downloadable
Command module
firmware rev: A.01
I-SCPI Win 3.1: Yes
I-SCPI Series 700: Yes
C-SCPI LynxOS: Yes
C-SCPI Series 700: Yes
Panel Drivers: Yes
VXI
plug&play
Win
Framework: Yes
plug&play
Win 95/NT
Framework: Yes
VXI
plug&play
HP-UX
Framework: No