Filter
Top Products
12 Chapter 2
Option Installation
Procedure
Recalling System Calibration Data from USB Pen drive to Removable
Hard Disk
The following is a description of the procedures to copy the system calibration data stored
in the USB Pen drive to the removable hard disk.
Step 1. Exit the measurement window.
System > Service Menu > Administorator Menu > Exit E5052B > OK
Step 2. Insert a USB pen drive in to the USB port in front panel.
Step 3. Open D:\Recovery drive.
Step 4. Click
syscal folder in the USB Pen drive from the explorer.
Step 5. Select
Edit - Copy from menu bar of the explorer.
Step 6. Click the
D:\ of the explorer.
Step 7. Select
Edit - Paste from menu bar of the explorer.
Step 8. Click
limit folder in the USB Pen drive from the explorer.
Step 9. Select
Edit - Copy from menu bar of the explorer.
Step 10. Click the
D:\ of the explorer.
Step 11. Select
Edit - Paste from menu bar of the explorer.
Step 12. Restart E5052B