Filter
Top Products
Installation
Connecting the Probe
62
“Install the Management Station Modem” below
“Install the Probe’s Modem” on page 63
“Configure the Management Station and the Probe” on page 63
Figure 3-13: The Probe’s Modem Connection
Install the Management Station Modem
You need the following list of equipment to install the management station’s
modem:
Hayes-compatible 300 to 38.4 K baud modem
RS-232C (straight through) modem cable
Modular phone cable with RJ-11 connectors or equivalent
Use the following procedure to install the management station’s modem:
CAUTION
Turn off all equipment prior to making cable connections.
1. Place the modem close enough to the management station to not violate the
50-foot RS-232C distance limitation.
2. Connect the RS-232C cable from the modem’s RS-232C port to the
management station’s serial port. Take care in selecting the appropriate
serial port on the management station (COM1 or COM2, for example).
3. Connect the RJ-11 modular phone cable from the modem
To Line
port to
the telephone jack.