Filter
Top Products
13
Accessories J1990A LAN Analyzer Tap Qty__
For use with the J6805A Distributed Network Analyzer ME.
This accessory provides the means to monitor an in-service 10/100 Mb/s Ethernet
connection unintrusively.
J2928A Pair of 10 dB Optical Attenuators (SC connectors) Qty__
For use with the J6811A LIM. Note: a pair is included with each J6811A LIM.
This accessory provides replacement attenuators should the originals be lost.
J2929A Multi-mode Optical splitter Qty__
(SC connectors) for use with J6811A LIM
J5491A Pair of SX GBIC Modules Qty__
For use with the J6832A LIM. Note: a pair is included with each J6832A LIM. This
accessory provides replacements should the originals be lost.
J5492A Pair of LX GBIC Modules Qty__
For use with the J6832A LIM.
J5493A SX Optical Splitter (50/50 split ratio) Qty__
For use with the J6832A LIM.
J5494A LX Optical Splitter (50/50 split ratio) Qty__
For use with the J6832A LIM.
J5495A Copper GBIC Module (one only) Qty__
For use with the J6832A LIM.
J6750A Alternative Hard Disk Drive Assembly Qty__
For use with the J6800A Network Analyzer.
This accessory comes pre-loaded with the operating system and the current version of Network
Analyzer Software. The drive can be swapped with the J6800A HDD for security reasons.
The use model for this accessory is as follows: the analyzer is moved between high-security
locations leaving a J6750A HDD secured at each of these locations. In this way, no
security risk occurs when the analyzer is moved as all sensitive data stays with the HDD.
J6751A Alternative Hard Disk Drive Assembly Qty__
For use with the J6802A Distributed Network Analyzer MX.
This accessory comes pre-loaded with the operating system and the current version of
Network Analyzer Software. The drive can be swapped with the J6802A HDD for security
reasons.
The use model for this accessory is similar to that for the J6750A accessory. Note that the
J6750A and the J6751A differ not only in the software loaded on each but also
physically; they are not interchangeable.
J6753A Additional Combo 56K Modem Qty__
10/100BaseTX Network Interface Card
This accessory can be used as a measurement interface for use with Network Analyzer
Software.
One instance of this network interface card is included with the J6800A Network
Analyzer when it ships. This accessory should therefore only be ordered if the customer