Aiphone SKK-620B Power Supply User Manual


  Open as PDF
of 2
 
- 2 -
2 WIRING
3 BEFORE ASKING FOR REPAIRS
If your intercom system does not work properly or malfunctions, do not attempt to change or rectify wiring. Ask qualified personnel. If the system is not being
used, SKK-620B can be unplugged.
4 SPECIFICATIONS
• Power source: AC 120V, 60Hz., 0.04A
• Secondary output voltage: DC 6V
• Secondary output current: 200mA
• Dimensions & weight: 2-1/2
"H x 1
-15/1
6"W x 1
-1/4
"D.
64H x 49W x 31D (mm).
Approx. 0.24 lbs. (110g)
• Ambient temperature: 32°F to 104°F (0°C to +40°C)
http://www.aiphone.net/
AIPHONE CO., LTD., NAGOYA, JAPAN
AIPHONE CORPORATION, BELLEVUE, WA, USA
WARRANTY
Aiphone warrants its products to be free from defects of material and workmanship under normal use and service for a period of one year after
delivery to the ultimate user and will repair free of charge or replace at no charge, should it become defective upon which examination shall
disclose to be defective and under warranty. Aiphone reserves unto itself the sole right to make the final decision whether there is a defect in
materials and/or workmanship; and whether or not the product is within the warranty. This warranty shall not apply to any Aiphone product
which has been subject to misuse, neglect, accident, or to use in violation of instructions furnished, nor extended to units which have been
repaired or altered outside of the factory. This warranty does not cover batteries or damage caused by batteries used in connection with the
unit. This warranty covers bench repairs only, and any repairs must be made at the shop or place designated in writing by Aiphone. Aiphone
will not be responsible for any costs incurred involving on site service calls. Aiphone will not provide compensation for any loss or damage
incurred by the breakdown or malfunction of its products during use, or for any consequent inconvenience or losses that may result.
Printed in China(E)
C-123L/A, LEM-1, LEM-3
AT-406
AT-206
Red (+)
SKK-620B
AC 120V
Black (-)
Cut
Cut
Master station
Red (+)
Black (-)
SKK-620B
AC 120V
TAR-3
TAR-3
Red (+)Red (+)
Black (-)Black (-)
SKK-620B
AC 120V
Connect ground wire to earth ground.
Do not use.
Connecting earth ground may cause noise.
Cut ground wire and insulate to prevent shorts.
Do not use.
Connecting earth ground may cause noise.
Cut ground wire and insulate to prevent shorts.
 previous