Filter
Top Products
26-port 10/100/1000Mbps Gigabit & Fast Ethernet Switch
14 AirLink+
Figure 3. Mount the Switch in the rack
Connecting Network Cable
The Switch supports 10/100/1000Mbps Gigabit Ethernet. It runs
full/half duplex transfer mode for 10/100Mbps and full duplex trans-
fer mode for 1000Mbps.
These ports are Auto-MDI type port. The Switch can auto trans-
form to MDI-II or MDI-X type, so you can just make an easy
connection that without worrying if you are using a standard or
crossover cable.
AC Power
The Switch can be used with AC power supply 100-240VAC, 50-60
Hz. The power switch is located at the rear of the unit adjacent to the
AC power connector and the system fan. The switch’s power sup-
ply will adjust to the local power source automatically and may be
turned on without having any or all LAN segment cables connected.