Filter
Top Products
AirLink Application Notes
AirLink Communications Page 9 www.airlink.com
The Advanced Menu has a great
many fea
tures, most of which do
not apply to this application.
Most of these settings deal with the
firewall functions inside the
IP52000. Since there is only one
device on the Ethernet port, and it is
connected to a CDPD Modem, and
not an ISP, the firewall is no
t really
necessary.
To put the Ethernet port outside the
IP5200, you must set the device up
as an Exposed Computer.
Select Enable Exposed
Computer Feature and
enter the IP of the Ethernet
device. In this case it is
192.128.1.101.