Filter
Top Products
Section 5
Connecting to the Access Point
Once you have properly configured the Access Point, your wireless computers should be able to detect
its signal.
Use your wireless network adapter’s utility to detect and connect to the Access Point. You can identify the
Access Point by its MAC Address, which is displayed in the BSSID field of your wireless network
adapter’s utility.
You can check the Access Point’s MAC Address on its bottom label.
If the signal is weak, try reorienting the Access Point’s antenna or relocate the Access Point to a different
place.
For more detailed information about using the Access Point’s Web Configuration Utility, please refer to
the User’s Manual on the provided CD.